Listing Description:
PETERBILT CHASSIS SPECIFICATIONS:
CAT C15; 550 HP @ 1800 RPM, 1850 ft/lbs @ 1200 RPM
EATON FULLER RTLO18918B, 18 spd transmission
10 3/4” x 3/8” thick steel frame rails with full insert
48” sleeper
20,000 lbs DANA SPICER single steer axle
58,000 lbs DANA SPICER tridem rear axle; Full diff. lock; AIR TRAC suspension; 3.91 axle ratio
One (1) 120 US gallon fuel tank, drivers and passenger side
BRIDGESTONE M844F 425/65R22.5 18ply front tires
BRIDGESTONE M711 11R24.5 14ply rear tires
267” wheelbase; 55” axle spacing; 102” wide track
FERRARI 990RA10 SPECIFICATIONS:
Lifting capacity of 48,060 lbs @ 9’10” Lifting capacity of 30,313 lbs @ 15’6”
Lifting capacity of 21,274 lbs @ 21’1” Lifting capacity of 15,652 lbs @ 27’
Lifting capacity of 11,904 lbs @ 33’5” Lifting capacity of 9,479 lbs @ 39’6”
Lifting capacity of 7,716 lbs @ 46’1” Lifting capacity of 6,437 lbs @ 52’7”
Lifting capacity of 5,489 lbs @ 59’3” Lifting capacity of 4,817 lbs @ 66’5”
Lifting capacity of 4,265 lbs @ 72’10” Lifting capacity of 3.858 lbs @ 79’10”
Ten (10) hydraulic extensions to approximately 80 ft
HETRONIC radio remotes and operator perch with seat and manual controls
DANFOSS four-function main control valve
North American J.I.C. hose and fittings
Continuous rotation
222” hydraulic outrigger spread when fully extended
Load holding vales on all hydraulic cylinders
NWC CUSTOM RIG UP SPECIFICATIONS:
TULSA Rufnek RN45, 45,000 lbs @ 41 ft/min(first layer, low speed), 22,500 lbs @ 82 ft/min(first layer, low speed); Air-slide fifth wheel assembly with ramps, live roll, and drop pin; Full steel fender; Steel frame, flow forge walking deck; Headache rack complete with chain and boomer hangers, full width chain tray, and sling hooks; tire chain hangers; CMVSS lighting
|
| Asking Price: |
Not listed |
| |
|
| Dealer Information |
|
| Name: |
LeRoy Mercereau |
| Company Name: |
North West Crane Ltd. |
| Location: |
Leduc, AB |
|
|
